TOE (Threaded One End) Pipe Nipples

Pipe OD	A(mm)	A(inch)	B(mm)	Part number 304	Price/each	Part number 316L	Price/each
1/8"	10.3	0.405"	20	RET10068	TBD	IFC10068	TBD
1/4"	13.7	0.540"	40	RET10069	TBD	IFC10069	TBD
3/8"	17.2	0.675"	40	RET10070	TBD	IFC10070	TBD
1/2"	21.3	0.840"	50	RET10071	TBD	IFC10071	TBD
3/4"	26.7	1.050"	50	RET10072	TBD	IFC10072	TBD
1"	33.4	1.315"	50	RET10073	TBD	IFC10073	TBD
1-1/4"	42.2	1.660"	60	RET10074	TBD	IFC10074	TBD
1-1/2"	48.3	1.900"	60	RET10075	TBD	IFC10075	TBD
2"	60.3	2.375"	60	RET10076	TBD	IFC10076	TBD
2-1/2"	73	2.875"	70	RET10077	TBD	IFC10077	TBD
3"	88.9	3.500"	80	RET10078	TBD	IFC10078	TBD
4"	114.3	4.500"	100	RET10079	TBD	IFC10079	TBD

·　For Use With: Natural Gas, Steam, Oil, Water, Air

·　ASME/ANSI B1.20.1 (pipe threading standard)

·　ASTM A-530, ASTM A-312 (chemical and mechanical requirements)

·　304 & 316 stainless steel dual specification L-grade

·　Manufacturing facility is ISO 9001:2008

·　Diameters: 1/8″ through 8″

·　Lengths: Close through 48″

The Nipple Threads are National Pipe Thread (NPT), also known as American National Standard Taper Pipe Thread. This is the common thread used for threaded pipe connections in the United States. NPT is defined by ANSI/ASME standard B1.20.1

Giraffe Stainless products are warranted to be free from defects in material and workmanship for a period of one year from the date of shipment. Any product that proves to be defective shall be repaired or replaced at the option of Giraffe Stainless, providing it has been used as recommended and in strict accordance with recognized piping practices, and that has not been subject to extraordinary service, such as encountered under severe corrosive or abrasive conditions.
Giraffe Stainless makes no warranties, express or implied, other than those listed above.
Giraffe Stainless shall not be liable for any consequential, indirect, incidental or contingent damages.

Request a quotation

TOE (Threaded One End) Pipe Nipples

Need a quotation or technical drawing?